27 March, 2019
A fuel injector can be heavily damaged by a pre-ignition event (bottom); a new injector is shown above. © 2019 Eshan Sing
A combustion problem that has troubled engine manufacturers since the industry began still plagues the designers of fuel-efficient engines. A team at KAUST’s Clean Combustion Research Center, led by Robert Dibble, focuses on understanding pre-ignition.
A single occurrence of pre-ignition—when fuel ignites prematurely in the engine cylinder to release a mistimed kick of energy—can cause major damage. Pre-ignition is sporadic and unpredictable. It is more prevalent in the downsized, turbocharged engines that car makers are now producing for improved fuel efficiency while maintaining power output.
“Pre-ignition remains a bottleneck to further downsizing and improving engine efficiency,” explains Eshan Singh, a Ph.D. student in Dibble’s team.
The team systematically changed engine parameters, including air intake temperature and exhaust back-pressure, thereby establishing the conditions most likely for pre-ignition. For example, the team observed more pre-ignition events with a higher exhaust back pressure: this occurs when the emptying of burnt fuel by the engine cylinder between combustion cycles is ineffective.
The researchers combined all their observations to build a picture of the pre-ignition phenomenon. “Our work unravels that the pre-ignition event is divided into several steps,” Singh says.
A pre-ignition event originates during the previous fuel combustion cycle, when fuel injected into the cylinder interacts with oil on the cylinder liner forming an oil-fuel droplet. At the end of each combustion cycle, the oil-fuel droplet is usually expelled from the cylinder; however, from time to time, the oil-fuel droplet remains and may trigger pre-ignition in the following cycle, the team showed. “Car makers need to break this chain of events to suppress pre-ignition,” Singh says.
Ph.D. student Eshan Singh working on the KAUST pre-ignition engine. Photo by Raheena Abdurehim
Stopping the fuel and oil from interacting, or completely exhausting all the burnt mixture from the engine, are two points where the event chain can be broken. Preventing the injected fuel from hitting the oil-coated cylinder liner is one approach. “We are looking at practical methods to reduce pre-ignition by changing the injection strategy,” Singh says. “We have filed a patent that uses injection strategies to provide pre-ignition-free operation without compromising engine power.”